Product description
Forms screed or floor of thickness 10 - 100 mm - layer thickness depends on the expected structural arrangement (see table below).
For application of new screeds or for repairs of the existing ones.
Can be used as a top coat layer.
Places of use: residential and public buildings, traffic routes, in technical and utility areas, garages and warehouses.
Recommended for application on screeds with heating system - does not require the use of elastifying admixtures, efficiently conducts heat.
Enables forming a slope and repairs of concrete surfaces, stairs, slabs, screeds, entry ramps.
Main properties
- Waterproof and frost-resistant.
-
Rapid increase of compressive strength - walking on a screed, foot traffic after 6 hours.
-
Strength after 24 hours > 25 MPa, after 3 days> 30 MPa.
-
Dense-plastic consistency - due to special modifiers content, working consistency of mortar allows for quick and easy distribution of the mix, floating or obtaining an even, smooth surface (horizontal or sloped).
-
Compressive strength ≥ 30.0 N/mm².
-
Flexural strength ≥ 5.0 N/mm².
-
High resistance to abrasion A12 grade - can be used as the final layer.
Main parameters
- Mixing ratio water / dry mix: 1.75÷2.25 l / 25 kg
- Min. / max. screed or floor thickness: 10 mm / 100 mm
- Pot life: min. 45 minutes
- Foot traffic: after 6 hours
