FOX DECORATIVE WAX 0.5kg

prior to application of Stucco.

The substrate should be:

• stable,
• dry,
• clean, i.e. dust free and clean of old paint coats and other coats which would impair product bonding, especially dust, dirt, wax and grease,
• even, free of cracks, fill gaps before the product application.

Product preparation

The product is delivered ready to use. Mix well before use in order to unify its consistency.

Application

WAX IMPREGNATING SEALER should be applied with a paintbrush or a microfiber cloth. Apply upon surfaces 0.5 up to 1.0 m² large and distribute with uniform thin coat. When it slightly dries, polish with a microfiber cloth or a cotton sponge. When the surface is polished, apply and polish the next ones until the whole surface gets coated.

If a particular section of decoration does not get glossy enough, apply more preparation there and polish with a microfiber cloth.

CONSUMPTION

Average consumption: approx. 0.016 l/m² per coat (0.3 l of product for approx. 18 m² of decoration). The actual consumption depends on substrate texture and absorptiveness, quality of preparation, expected decorative effect, technique of application, user’s experience, number of coats.

TECHNICAL DATA

Temperature of preparation, of substrate and ambient during application and drying: from +5 °C to +25 °C

Number of coats: 1-2

Time of drying: tack-free after approx. 2 h*

Application of the 2nd coat: after 2 h*

Time of complete drying (start of use): ok. 12 h*

*Time recommended for application in temperature approx. 23°C and humidity 55%; at lower temperature and higher humidity time can extend.